Install The M.2 Backplane - Lenovo 7X18 Maintenance Manual

Note: Pull the M.2 backplane straight up when removing it from the system board.
Figure 68. M.2 backplane removal
To remove an M.2 drive from the M.2 backplane, see
page 82.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Install the M.2 backplane

Use this procedure to install the M.2 backplane.
Before installing the M.2 backplane:
1. Read the safety information and installation guidelines (see
Guidelines" on page
2. Install an M.2 drive to every available connector on the M.2 backplane (see
M.2 backplane" on page
3. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
4. Disconnect the USB 3.0 cable of operator panel tray assembly, and remove it vertically from the system
board.
ThinkSystem SR850 Maintenance Manual
80
55).
82).
"Remove an M.2 drive from the M.2 backplane" on
"Safety" on page iii and "Installation
"Install an M.2 drive in the