Figure 82. Removing USB 3.0 connector vertically
Step 3.
Remove the USB 3.0 cable from the cable guide.
Step 4.
Remove the screw that secures the tray assembly.
Step 5.
Grasp the tab on the rear of the tray assembly, and push it out from the server.
Figure 83. Operator panel tray assembly removal
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Demo video
Watch the procedure on YouTube
Install the operator panel tray assembly
Use this procedure to install the operator panel tray assembly.
Before installing the operator panel tray assembly:
1. Read the safety information and installation guidelines (see
Guidelines" on page
ThinkSystem SR850 Maintenance Manual
90
55).
"Safety" on page iii
and
"Installation