Switches, Jumpers, And Buttons - Lenovo 7X18 Maintenance Manual

Switches, jumpers, and buttons

The following illustrations show the location of the switches, jumpers, and buttons on the server.
Note: If there is a clear protective sticker on the top of the switch block, you must remove and discard it to
access the switch.
Figure 12. Switches, jumpers and buttons
Table 10. System-board switches, jumpers, and buttons
J20
1
Light path button
2
Press this button to light the LEDs on the system board
when the power source has been removed from the
server.
The following table describes the functions of the SW13 switch block on the system board.
The following table describes the functions of the SW613 switch block on the system board.
Table 11. System-board SW13 switch block descriptions
Switch number Default position
1 Off
ThinkSystem SR850 Maintenance Manual
26
Switch block (SW13)
3
See Table 11 "System-board SW13 switch block
descriptions" on page 26
Off
Host TPM Physical Presence
disable
for more details.
On
Host TPM Physical Presence
enable