Lenovo 7X18 Maintenance Manual page 49

2. With SATA/SAS RAID adapter (8i)
Figure 32. Cable routing, 8-bay backplane + 8-bay backplane
Table 30. Cables and adapters for routing
SATA/SAS RAID adapter (8i)
1
SATA/SAS RAID adapter (8i)
2
8-bay backplane + AnyBay backplane
Notes:
• When installing a 8-bay backplane and a AnyBay backplane, always install the 8-bay backplane to drive
bay 0-7, and the AnyBay backplane to drive bay 8-15.
• Install the processor and memory expansion tray before connecting the signal cables to NVMe connectors
on the expansion tray (see
Two processors installed
Two options are available for this combination:
1. With one SATA/SAS RAID adapter (16i)
"Install the processor and memory expansion tray" on page
SATA/SAS signal cables (720 mm)
3
SATA/SAS signal cables (720 mm)
4
Chapter 2
122).
.
Server components
41