Table of Contents
Advertisement
Step 2.
Insert the TCM/TPM adapter into the TCM/TPM connector on the system board.
Notes:
• Carefully handle the TCM/TPM adapter by its edges.
• Your TCM/TPM adapter might look slightly different from the illustration.
Figure 135. TCM/TPM adapter installation
After installing the TCM/TPM adapter, complete the following steps:
1. Finish installing the system board (see
2. Reinstall the top cover (see
3. Reconnect the power cords and any cables that you removed.
4. Power on the server and any peripheral devices.
Top cover replacement
Use this procedure to install or remove the top cover.
ThinkSystem SR850 Maintenance Manual
144
"Install the system board" on page
"Install the top cover" on page
132).
146).
Advertisement
Table of Contents
