Table of Contents
Advertisement
5.
Equipment
5-1. Warning Indicators
WARNING : INJURY
Close all doors and place locks during operation, to avoid injuries by
unintentionally contact with moving parts such as the cooling fan and fan belt.
Before performing any equipment check or maintenance, stop the engine, and
remove the engine key. A person performing the maintenance should always
keep the key.
CAUTION : BURNS
Do not touch the engine and surrounding components immediately after
stopping the equipment, while temperature can reach extremely high.
This generator is equipped with the following warning indicators "DIAG" (diagnostic),
"BOOST" (boost temperature),"CHARGE" (battery charging), "OIL PRESS" (oil
pressure), "OVER HEAT" (water temperature), and "OVER SPEED" (engine
overspeed).
Warning indicators light up if some fault occurs during operation and the engine might
be automatically stopped depending on the type of fault.
Under normal operating conditions these monitoring lamps will come on momentarily
when the engine is first started but will go off very shortly thereafter.
10
Advertisement
Table of Contents
