Equipment; Controller - Shindaiwa DG50MKM-P Owner's And Operator's Manual

5. Equipment

5-1. Controller

This generator has a Controller which is used for starting or stopping the power generator
or the engine, for monitoring. If you turn the Power Switch to ON position, the status
Screen appears.
(1) Front panel elements
3
5
① STOP button
Press this button to initiate the stop sequence of the gen-set.
② START button
Press this button to initiate the start sequence of the engine.
③ LEFT button
Use this button to move left or to change the mode. The button can change the mode
only if the main screen with the indicator of currently selected mode is displayed.
④ RIGHT button
Use this button to move right or to change the mode. The button can change the mode
only if the main screen with the indicator of currently selected mode is displayed.
4
6
15
14 13
11
10
7 8
9
10
12
2
1