Equipment; Operation Display - Shindaiwa DGK180FP Operator's Manual

5. Equipment

5-1. Operation Display

This generator has an Operation Display which is used for starting or stopping the power
generator or the engine, for monitoring and for maintenance. If you twist the power switch, the
Status Lamp on the Operation Display illuminates, and the Main Screen appears. Press the
"↑" button or the "↓" button to select between screens shown on the display. There are 7
different screens that appear on the display: "Parallel (Main) " (1st screen), "Single " (2nd
screen), "Engine Info. " (3rd screen), "Tank Indicator " (4th screen) , "Synchro " (5th screen),
"Service Timer " (6th screen), and "Voltage Adjust " (7th screen).
(1) Parallel (Main)
(
INTERNAL
TANK
Fuel Meter
Fault Reset Button
History Button
Open/Close GCB Button
Screen Objects
 Parallel / Single
Operation
Monitor
 Gen V Ph-N[V]
 Current[A]
 Gen V Ph-Ph[V]
 Gen freq[Hz]
1st screen)
Gen V Ph (L1/L2/L3)-N
: "Parallel Operation" or "Single Operation" will be displayed
based on selector position.
("Single operation" will be displayed when the engine is
stopped.)
: Phase(L1/L2/L3) - Neutral voltage meter
: Phase(L1/L2/L3) Current meter
: Phase-Phase voltage meter
: Frequency meter
Status Lamp
↑ Button
↓ Button
(L1/L2/L3) Current
Synchro Button
AlarmList Button
13
Power Switch
Parallel / Single
Operation
Monitor
INTERNAL
TANK
DEF Meter
Mode Monitor
Mode Button