Shindaiwa DGK150DU Owner's Manual page 44

Oil filter tightening torque: 63.7 ± 4.9 Nm ( 6.5 ± 0.5 kgfm / 47.0 ± 3.6 lbf･ft )
< NOTE >
Request the authorized distributor where the generator was purchased to perform this
procedure if you do not have a filter wrench.
Oil filter part no
(3) Replacing the PCV(Oil Separator) Filter
Thereafter Every 500 hours
Wipe clean around the PCV filter
1
cap taking care so that no
foreign particles entry. Remove
the PCV filter cap.
Remove the PCV filter element.
2
Install the new PCV filter
3
element.
Install the PCV filter cap.
4
< NOTE >
PCV filter element:
ISUZU Part No.
898030-5320
(4) Air Filter Element Cleaning/Replacement
Clean Every 250 hours
Replace Every 500 hours
Loosen the bolt that is holding the air cleaner
1
and remove the cleaner cap.
Unscrew the wing nut and
2
remove the filter element.
Clean or replace the filter
3
element, and reinstall it in
reverse order.
ISUZU Part No.
898302-0751
PCV Filter
(Oil Separator)
Wing Nut
Cleaner Cap
41
Loosen Tighten
(Oil Separator)
Air Cleaner
Cleaner Cap
Fixing Bolt
Air Cleaner
Inner Element
Outer Element
Cover
O-ring
Element
PCV filter