Voltage Selector Switch - Shindaiwa DGK150DU Owner's Manual

5-3. Voltage Selector Switch

The voltage selector switch is located above the terminal panel. The lockable voltage
selector switch makes a quick and convenient method of changing the generator
output voltage.
< NOTE >
Serious damage may occur when the selector switch is changed while generator
is running.
Positions:
3 PHASE 480/277V :
The Three Phase 480/277V position gives an output from the generator of 480 volts
three phase or 277 volts single phase.
3 PHASE 208/120V :
The Three Phase 208/120V position gives an output from the generator of 208 volts
three phase with 120 volts single phase or 240 volts three phase with 139 volts
single phase. 208 volts or 240 volts three phase are obtained by adjusting the
voltage resister on the control panel.
1 PHASE 240/120V :
The Single Phase 240/120 volt position gives a single phase output from the
generator of 240 volts or 120 volts.
19