Meters And Gauges - Shindaiwa DGK150DU Owner's Manual

5-2. Meters and Gauges

Engine Meters and Gauges
(1) Hour Meter
(2) Water Temperature Gauge
< NOTE >
If the needle of the water temperature meter exceeds the standard value, immediately stop
the equipment being used, allow the generator to cool by idling the engine, and wait until the
water temperature decreases.
(3) Oil Pressure Gauge
(4) Fuel Gauge
Displays the operating time. Use this to schedule periodic
inspection. Be careful as the hour meter operates when the
starter switch is at RUN regardless of whether the engine is
running or stopped.
Water Temperature Gauge displays the temperature of engine
coolant. Normal temperature may vary depending on the
environment, but it should be between 167 to 194 ° F ( 75 to 90 ° C ).
Oil Pressure Gauge displays the pressure of engine oil. Normal
pressure may vary depending on the environment, but it should
display 43.5 - 87.0 psi (3.0 - 6.0 x 100kPa).
However, under cold weather, the pressure gauge may display
higher reading. Continue idling until the pressure falls to normal
range.
It shows the volume in the fuel tank.
When filled up, it shows 『F』.
When the indicator is approaching to 『E』, the amount of fuel is
close to empty.
Replenish fuel enough promptly.
13