Mitsubishi Heavy Industries V Multi FDC71VNX Technical Manual page 70

How to set function
How to set function
1.
1.
2.
3.
2.
3.
4.
4.
5.
- - -
Hi - Lo Hi - Me 6.
UH - Me UH - Hi
5.
- -
Hi - Me 6.
UH - Hi
7.
7.
Stop air-conditioner and press
Stop air-conditioner and press (SET)
buttons at the same time for over three seconds, and the buttons at the same time for over three seconds, and the
"FUNCTION SET " will be displayed.
"FUNCTION SET " will be displayed.
Press (SET) button.
Make sure which do you want to set, "
Press (SET) button.
(remote control function) or "I/U FUNCTION
unit function).
Make sure which do you want to set, "
Press or button.
(remote control function) or "I/U FUNCTION
Selecct " FUNCTION " (remote control function) or "I/U
FUNCTION " (indoor unit function).
unit function).
Press or button.
Selecct " FUNCTION " (remote control function) or "I/U
Press (SET) button.
FUNCTION " (indoor unit function).
On the occasion of remote control function selection
"DATA LOADING" (Indication with blinking)
Display is changed to "01
Press (SET) button.
Press or button.
"No. and function"are indicated by turns on the remote
control function table, then you can select from them.
On the occasion of remote control function selection
(For example)
"DATA LOADING" (Indication with blinking)
Function No.
Function
Display is changed to "01
Press (SET) button.
The current setting of selected function is indicated.
Press or button.
(for example) "AUTO RUN ON" If "02 AUTO RUN SET" is
selected
"No. and function"are indicated by turns on the remote
control function table, then you can select from them.
(For example)
Setting
Press or button.
Select the setting.
Press (SET) button.
The current setting of selected function is indicated.
(for example) "AUTO RUN ON"
selected
Press (SET)
"SET COMPLETE" will be indicated, and the setting will be
completed.
Then after "No. and function" indication returns, Set as the
same procedure if you want to set continuously ,and if to
finish, go to 7.
Press or button.
Select the setting.
Press ON/OFF button.
Setting is finished.
Press (SET)
"SET COMPLETE" will be indicated, and the setting will be
It is possible to finish by pressing ON/OFF button on the way, but unfinished change of setting is
completed.
unavailable.
During setting, if you press
Then after "No. and function" indication returns, Set as the
Setting is memorized in the control and it is saved independently of power failure.
same procedure if you want to set continuously ,and if to
finish, go to 7.
How to check the current setting
When you select from "No. and funcion" and press set button by the previous operation, the "Setting" displayed first is the current
setting.
(But, if you select "ALL UNIT ", the setting of the lowest number indoor unit is displayed.)
Press ON/OFF button.
Setting is finished.
Operation message
Function description:
(SET) (MODE)
(MODE)
setting description:
FUNCTION "
" (indoor
FUNCTION "
" (indoor
1
6
Indoor unit selection button
On the occasion of indoor unit function selection
"DATA LOADING" (Blinking for 2 to 23 seconds to read the data)
". Indication is changed to "02 FAN SPEED SET".
Go to .
[Note]
(1) If plural indoor units are connected to a remote control,
the indication is "I/U 000" (blinking)
the indoor unit connected is indicated.
".
(2) Press
Select the number of the indoor unit you are to set
If you select "ALL UNIT
all unites.
(3)
Press
Press
"No. and function" are indicated by turns on the indoor unit function
Function No.
table, then you can select from them.
Function
(For example)
Press
If "02 AUTO RUN SET" is
The current setting of selected function is indicated.
(For example) "STANDARD"
selected.
Setting
Press
Select the setting.
Press
"SET COMPLETE" will be indicated, and the setting will be
completed.
Then after "No. and function" indication returns, set as the same
procedure if you want to set continuously , and if to finish, go to 7.
When plural indoor units are connected to a remote control,
press the AIR CON No. button, which allows you to go back to
the indoor unit selection screen. (example "I/U 000
(RESET) button, you return to the previous screen.
69
- -
PJA012D730
Operation message
Function description:
,
setting description: Function No.
Fixing button
7
Finishing button
2
Starting button
Previous screen button
1
6
Indoor unit selection button
On the occasion of indoor unit function selection
The lowest number of
"DATA LOADING" (Blinking for 2 to 23 seconds to read the dat
Indication is changed to "02 FAN SPEED SET".
Go to .
or button.
[Note]
", you can set the same setting with
(1) If plural indoor units are connected to a remote control,
(SET) button.
the indication is "I/U 000" (blinking)
or button. the indoor unit connected is indicated.
Function No.
Function
(2) Press or
(SET) button.
Select the number of the indoor unit you are to set
If you select "ALL UNIT
If "02 FAN SPEED SET" is
all unites.
(3)
Press
Setting
or button.
Press or
"No. and function" are indicated by turns on the indoor unit fun
table, then you can select from them.
(SET) button.
(For example)
Press (SET) button.
The current setting of selected function is indicated.
(For example) "STANDARD"
selected.
Press or
Select the setting.
Press (SET) button.
"SET COMPLETE" will be indicated, and the setting will be
completed.
Then after "No. and function" indication returns, set as the sam
procedure if you want to set continuously , and if to finish, go to
PJA012D73
'19 • PAC-T-327
,
Function No.
Fixing button
7
Finishing button
2
Starting button
Previous screen button
The lowest number
button.
", you can set the same setting
(SET) button.
button.
Function No.
Function
If "02 FAN SPEED SET" is
")
Setting
button.