Mitsubishi Heavy Industries V Multi FDC71VNX Technical Manual page 399

1
③
How to install the receiver(continued)
Installation of the receiver
①
② Put the wiring of the receiver through the opening.
③ Put the wiring on the notch on the control box so as not to be pinched by the control box and lid as
shown below.
④ Connect the wiring to the terminal block provided in the control box. (No polarity)
⑤ Attach the receiver to the panel according to the panel installation manual.
⑥ Fix the wiring with the clamp so that the wiring do not contact the edge of control box's metal sheet.
⑦ Reattach the control box lid with 3 screws removed.
3
Terminal block in the indoor
unit control box
398
- -
2
'19 • PAC-T-327
.
4