Section 4 • Menu Screen Overview; Navigation Buttons; Figure 4-1. Menu Screen - Emerson VILTER MicroVission Operation And Service Manual

Section 4 • Menu Screen
Overview
The Menu screen is the launching point to every other
section of the MicroVission panel software. Every screen
navigated to from this screen will return to the menu
screen upon exiting, see Figure 3-1.

Navigation Buttons

Compressor Control
Navigates to the Compressor Control screen where the
operator can set the various compressor control param-
eters.
Alarms and Trips
Navigates to the Alarms and Trips screen where the op-
erator can set the various alarm and trip parameters.
Timers
Navigates to the Timers screen where the operator can
set the various time related parameters.
Compressor Scheduling
Navigates to the Compressor Scheduling screen where
the operator can set the scheduler to change the control
method at settable dates and times.
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3
Instrument Calibration
Navigates to the Instrument Calibration screen where
the operator can calibrate all the system sensors.
Service Options
Navigates to the Service Options screen where the oper-
ator can manually turn on/off digital and analog outputs
for maintenance and diagnostics purposes.
Trend Chart
Navigates to the Trend Chart screen where the operator
can select up to four parameters for graphical historical
data trending.
Event List
Navigates to the Event List screen where the operator
can view the systems events such as trips or alarms in
descending chronological order.
Input/ Output States
Allows viewing of the live data of all analog and digital
input and outputs. Also allows viewing of a "snapshot"
of all analog and digital input and outputs at the time of
the last compressor fault event.

Figure 4-1. Menu Screen

4 – 1