4.7 VIRTUAL KEYBOARD
The Virtual Keyboard present some direct access function which can be enabled by touching the relative icon.
The activation of any function will trigger an animation effect (a "snake" moving effect on the display) and, at
the end, a segment above the function icon (or below, depending on the position of the icon) will be lit.
4.8 LOCK AND ULOCK DEVICE
It is possible to lock the device:
-
Swiping-up (V-SWIPE) from HOME and then by touching the display anywhere (1 or 3 sec depending
on par. bPt).
Activating the "auto lock" function through a timer (par. SCA).
-
When locked, every action on the device will show a "LoC" blinking icon.
It is possible to unlock the device:
Swiping-up (V-SWIPE) from HOME and then by touching the display anywhere (1 or 3 sec depending on par.
bPt).
4.9 SETPOINT MENU
When in Setpoint Menu SEt, it is possible to enter the Temperature Setpoint modification by touching the
display anywhere (1 or 3 sec depending on par. bPt). The label indicates that the modification of the
temperature set point is enabled. Adjust the value through some V-SWIPE gestures on the top of every
single digit and then confirm the new value by pressing the SET icon. Press the BACK icon to exit (come
back to the Setpoint Menu) without saving.
4.10 HOTKEY – UPLOAD
a.
It is possible to use the HotKey Upload Menu function to save the current device configuration (parameter
values) into the external memory. To do this, follow these instructions:
1. H-swipe to go on the UPL screen
1592040000 XR20-30-60-70T EN v1.5 2023.10.12.docx
XR20-30-60-70T
11/38