Process Temperature Or Pressure - Emerson VILTER MicroVission Operation And Service Manual

Section 8 • Instruments Calibration

Process Temperature or Pressure

The Process Control tab on this page will display either
Process Temperature or Process Pressure depending
on the "Process Control" type selected by the operator
in the Configuration screen. For more information, see
Configuration section.
The tab is divided into two sections, Device Calibration
and Channel Calibration with Default Devices and
Custom Device as well as Offset and Range Calibration
features as described for the standard Pressure and
Temperature Inputs.
Figure 8-10. Instrument Calibration Screen Page 3 – Analog Inputs (Process Temperature)
8 – 7
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3