How To Use This Manual - Emerson VILTER MicroVission Operation And Service Manual

Manual revision should match software version.
This manual contains instructions for the MicroVission
Operation & Service Manual. It has been divided into 28
sections.
Section 1: Installation Recommendations
Section 2: Main Screen
Section 3: Hardware Architecture
Section 4: Menu Screen
Section 5: Compressor Control Screen
Section 6: Alarms and Trips Screen
Section 7: Timers Screen
Section 8: Instrument Calibration Screen
Section 9: Event List Screen
Section 10: Input/Output Screen
Section 11: User Access
Section 12: Configuration Screen
Section 13: Data Back-Up
Section 14: Maintenance
Section 15: Compressor Scheduling
Section 16: Service Options
Section 17: Trend Chart
Section 18: Help Screen
Section 19: Compressor Sequencing
Section 20: Auxiliary I/O
Section 21: Condenser Control
Section 22: Parts
Section 23: Warranty Claim Processing
Appendix A: Unloaders
Appendix B: Communication Tables
Appendix C: Remote Control and Monitoring
Appendix D: Compressor Sequencing Setup
Appendix E: Abbreviations Used on the MicroVission
Panel Screen
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3

How To Use This Manual

NOTE It is highly recommended that the manual be reviewed
prior to servicing the MicroVission system parts.
Figures and tables are included to illustrate key concepts.
Safety precautions are shown throughout the manual.
They are defined as the following:
WARNING - Warning statements are shown when there
are hazardous situations, if not avoided, will result in se-
rious injury or death.
CAUTION - Caution statements are shown when there
are potentially hazardous situations, if not avoided, will
result in damage to equipment.
NOTE - Notes are shown when there are additional infor-
mation pertaining to the instructions explained.
NOTICE - Notices are shown when there are important
information that can help avoid system failure.
ADDITIONAL IMPORTANT NOTES
• Due to continuing changes and unit updates, always
refer to the www.Emerson.com/Vilter to make sure
you have the latest manual.
• Any suggestions for manual improvements can be
made to Vilter Manufacturing at the contact infor-
TM
mation on page iii.
TOC − 13