Analog Input Board I/O; Table 2-5. Auxiliary Analog Input - Emerson VILTER MicroVission Operation And Service Manual

Section 2 • Hardware Architecture

Analog Input Board I/O

For information about each Analog input signal, see

Table 2-5. Auxiliary Analog Input.

Auxiliary Analog Input #1 - #8
• Optional analog inputs that can be configured to con-
trol, alarm or trip.
Connector on
Auxiliary Analog I/O #
Input Board
X1 – 4
X1 – 7
X2 – 2
X2 – 5
X3 – 2
X3 – 5
X4 – 2
X4 – 5
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3
Table 2-5. Auxiliary Analog Input
Description
1 Auxiliary Input #1
2 Auxiliary Input #2
3 Auxiliary Input #3
4 Auxiliary Input #4
5 Auxiliary Input #5
6 Auxiliary Input #6
7 Auxiliary Input #7
8 Auxiliary Input #8
Channel Type
INPUT 0-5 V, 0-10 V, 4-20 mA, RTD, ICTD
INPUT 0-5 V, 0-10 V, 4-20 mA, RTD, ICTD
INPUT 0-5 V, 0-10 V, 4-20 mA, RTD, ICTD
INPUT 0-5 V, 0-10 V, 4-20 mA, RTD, ICTD
INPUT 0-5 V, 0-10 V, 4-20 mA, RTD, ICTD
INPUT 0-5 V, 0-10 V, 4-20 mA, RTD, ICTD
INPUT 0-5 V, 0-10 V, 4-20 mA, RTD, ICTD
INPUT 0-5 V, 0-10 V, 4-20 mA, RTD, ICTD
Signals Type
2 – 9