Sending Document To Folder On An Ftp Server (Scan To Ftp) - Kyocera ECOSYS MA6000ifx Operation Manual

Operation on the Machine > Sending Document to Folder on an FTP Server (Scan to FTP)
Sending Document to Folder on an FTP Server
(Scan to FTP)
NOTE
• When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
Primary Network (Client) (page 8-55)
• Before sending a document, configure the FTP Client (Transmission) .
Making a note of the computer name and full computer name (page 3-17)
1
[Home] key > [Send]
2
Place the originals.
Loading Originals (page 5-2)
3
In the destination screen for sending, select [+] > [FTP]
4
Enter the destination information.
Character Entry Method (page 11-10)
The table below lists the items to be set.
Item
*1
Host Name
Port
*2
Folder Path
Login User Name
Login Password
*1 To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [2001:db8:a0b:12f0::10])
*2 When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the slash "/" not
using the back-slash.
Descriptions
Host name or IP address of FTP server
Port number
If the port number is not specified, the default port number is
21.
Path for the file to be stored
For example: User\ScanData
If no path is entered, the file is stored in the home directory.
FTP server login user name
FTP server login password
5-23
Max. characters
Up to 64 characters
―
Up to 128 characters
Up to 64 characters
Up to 64 characters