(From the previous page)
Name
Symbol Display Range
Cumulative
FC
feedback pulse
2
FY 1
Full-C within
one-revolution
position low
Full-C within
FY2
one-revolution
position high
Full-C
FLS
ABS counter
After any of the status displays is selected, the symbol is displayed. The data of the status display is shown when set is
pressed. Only at power-on, however, the data is shown after the symbol of the display selected in the parameter has been
shown for 2 [sec].
When the negative value of the cumulative feedback pulse, droop pulse or cumulative command pulse is displayed, the
decimal points in the second, third, fourth and fifth digits turn on.
Unit
−99999
pulse Feedback pulses from the full closed end encoder are counted and displayed.
∼
When the value exceeds 99999, it starts with zero.
Press the set button to start the value from zero.
99999
0
pulse The position within one revolution of the full closed end encoder is displayed in
∼
the pulse unit of the encoder.
99999
When the value exceeds 99999, it starts with 0.
0
pulse The position within one revolution of the full closed end encoder is displayed in
∼
the 100 pulse unit of the encoder.
99999
When the value exceeds 9999, it starts with 0.
−32768
rev
The value is displayed according to the increase/decrease of the multi-revolution
∼
counter of the full closed end encoder.
32767
Since the absolute position function is invalid for this model, it has nothing to do
with the absolute position home position.
Description
-31-
BCN-B32110-011