IBM x3250 M2 Problem Determination And Service Manual page 72

To install a replacement adapter, complete the following steps:
54
IBM System x3250 M2 Types 4190, 4191 and 4194: Problem Determination and Service Guide
Expansion-slot cover
1. See the documentation that comes with the adapter for instructions for setting
jumpers or switches and for cabling.
2. Touch the static-protective package that contains the adapter to any unpainted
metal surface on the server. Then, remove the adapter from the
static-protective package. Avoid touching the components and gold-edge
connectors on the adapter.
3. Place the adapter, component side up, on a flat, static-protective surface and
set any jumpers or switches as described by the adapter manufacturer, if
necessary.
Adapter
bracket
Adapter
Adapter
Adapter support
bracket
Expansion slot 1
Riser-card
assembly
Expansion slot 2
Expansion-slot
bracket
Tab