IBM x3250 M2 Problem Determination And Service Manual page 212

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, Types 4190, 4191 and 4194 server," on page 31 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
system event/error log message
LAN: Ethernet interface is now active
LAN: Telnet tamper triggered. Possible break-in
attempt
LAN: Web Server tamper delay triggered.
Possible break-in attempt
No ISMP gateway defined for the interconnect
network. RSA x is assuming the gateway
OS Watchdog response enabled by x
OS Watchdog response disabled by x
PFA Alert, see preceding error in system error
log.
Possible ASM reset occurred --- reason
unknown
Power off
Power on
PPP_1: Client connected at nnnn bps
PPP_1: User requested to abort PPP interface
PPP[xxx] PPP-Cfg, Local-
IP@=aaa.aaa.aaa.aaa, Remote-
IP@=bbb.bbb.bbb.bbb NetMsk=ccc.ccc.ccc.ccc,
Auth=ddd
Received alert from system x; type: y,
sender's ID: z
Remote access attempt failed
Remote access attempt failed. Invalid userid or
password received. Userid is 'x' from TELNET
client at IP@=yyy.yyy.yyy.yyy
Remote access attempt failed. Invalid userid or
password received. Userid is 'x' from CMD
mode client at IP@=yyy.yyy.yyy.yyy
Remote access attempt failed. Invalid userid or
password received. Userid is 'x' from WEB
browser at IP@=xxx.xxx.xxx.xxx
Remote login successful. Login ID: 'x' from CMD
mode client at IP@=yyy.yyy.yyy.yyy
Retry count exceeded. Incorrect password
entered too many times for userid x
RSA x became the ISMP gateway
RS485 broadcast from x ignored; more than y
devices present on the RS485 network
RS485 connection to system x has ended
194
IBM System x3250 M2 Types 4190, 4191 and 4194: Problem Determination and Service Guide
Action
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only. See the preceding entry in the system-error log.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.
Information only.