Hp Jetdirect Port Printing Using Tcp/Ip Or Ipx/Spx; In Windows Nt 4.0; Using Netbeui In Windows Nt 4.0 - Panasonic WORKIO DP-CL21 Network Manual

Settings and Printing

HP JetDirect Port Printing using TCP/IP or IPX/SPX

in Windows NT 4.0

This enables you to use the HP JetDirect port printing using the HP JetAdmin software.
TCP/IP or IPX/SPX protocol is used for printing.

Using NetBEUI in Windows NT 4.0

The following are the steps to print using the NetBEUI protocol in Windows NT 4.0.
NOTE:
• When printing a document using NetBEUI, and the data cannot be printed; the printer will halt and an
error message will be displayed.
Step 1: Setting up NetBEUI on the computer
Step 2: Setting up NetBEUI on the printer
Step 3: Setting up the printer driver and the printer port on the computer
• When printing directly from a computer to a printer or through a shared computer (server),
step 3 must be performed on all Windows NT 4.0 computers.
■ Step 1: Setting up NetBEUI on the computer
To print using the NetBEUI protocol, the NetBEUI protocol must be installed in the Network properties.
Refer to Windows Help or documentation for more details.
■ Step 2: Setting up NetBEUI on the printer
Refer to "Step 2: Setting up NetBEUI on the printer" on page 50
95 / Windows 98 / Windows
Maintenance and Spec.
Me".
Network
Network
Setup in Windows
in "Using NetBEUI in Windows
93