Panasonic WORKIO DP-CL21 Network Manual page 130

Settings and Printing
[D] Using NDPS - HP Gateway (NetWare 5.x / NetWare 6 only)
NDPS Manager and NDPS Broker must be created before proceeding the following steps.
1
Start the server system.
2
Start the client system and log on the network in the NDS mode.
3
Double click nwadmn32.EXE to display the NetWare Administrator window.
4
With the container object highlighted, click Create... from the Object menu.
The New Object window is displayed.
5
Select NDPS Printer from the Class of new object box, then click [OK].
The Create NDPS Printer window is displayed.
6
Enter a printer name (for example: DP-CL21M) in the NDPS Printer Name box,
click on the Create a New Printer Agent check button and click [Create].
The Create Printer Agent window is displayed.
7
Select the Hewlett-Packard IP/IPX Printer Gateway from the Gateway Types
window, click the [...] button to the right of the NDPS Manager Name box,
select any NDPS Manager from the left window and click [OK].
8
Click [OK].
The Configure HP Printer Gateway for PA window will be displayed.
9
Leaving the – No Printer Type – selected from the Printer Type box, click on
either IP Printer or IPX Printer check box. Select the printer from the list
displayed in the Printer/JetDirect window, and then click [OK].
The Select Printer Drivers window is displayed.
NOTE:
• If the server and the printer are communicating using TCP/IP protocol, then use IP Printer.
10
If the printer driver(s) have not been installed into the NDPS Broker, then select
[None] from the Printer Drivers box. Click [Continue].
NOTE:
• For detailed instruction on adding the alternate printer driver, refer to the NetWare manual.
11
Click [OK].
The NDPS printer DP-CL21M will be displayed in the NetWare Administrator window.
Maintenance and Spec. Network
Network
Setup in NetWare
130