Panasonic WORKIO DP-CL21 Network Manual page 163

Settings and Printing
■ TCP/IP
Name
Use TCP/IP Protocol
Use DHCP/BOOTP
Use RARP
IP Address
Subnet Mask
Default Gateway
Use FTP/LPD Banner
DNS Server -
Primary (Preferred)
Server
DNS Server -
Secondary (Alternate)
Server
WINS Server - Primary
(Preferred) WINS
Server
WINS Server -
Secondary (Alternate)
WINS Server
WINS Server -
Scope ID
Maintenance and Spec.
Factory Default
ENABLE
ENABLE
ENABLE
0.0.0.0
0.0.0.0
0.0.0.0
DISABLE
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
NULL
Network
Network
Description
Enables or disables TCP/IP protocol.
Enables or disables DHCP/BOOTP. When
enabled, DP-CL21P or DP-CL21M gets an IP
Address from the DHCP/BOOTP server while
booting. To use this function DHCP/BOOTP
server must exist on the network.
Enables or disables RARP. RARP is a protocol
which obtains IP Address from RARP server.
When using this function, a RARP server must
exist on the same network.
IP Address for the network in which the
DP-CL21P or DP-CL21M is installed.
Subnet mask for the network in which the
DP-CL21P or DP-CL21M is installed.
IP Address of the default gateway through which
systems on other networks can be reached.
Prints a banner page when using LPR printing.
Sets the address of the DNS Server.
Sets the address of another DNS Server.
Sets the WINS server (primary) address. The
Computer Name of the NetBEUI/NetBIOS
is used for NETBIOS name.
Sets the WINS server (secondary) address.
The Computer Name of the NetBEUI/NetBIOS is
used for NETBIOS.
Sets Scope ID.
163
Appendix