Panasonic WORKIO DP-CL21 Network Manual page 45

Settings and Printing
■ Step 4: Installing IPP Port on the computer
This step explains how to install IPP Port monitor for the network printer port.
Before installation, confirm that the printer is connected to the network correctly and is Ready.
1
Click [Start], move the pointer to Programs, Panasonic and Panasonic
DP-CL21P or Panasonic DP-CL21M, then click Add Network Printer Port.
The Wizard to add DP-CL21 Network Printer Port window is displayed.
2
Click on the Print using IPP check button and then click [Next >].
3
Click either the Connect using a modem and telephone line or Connect
using a local area network check button. Click [Next >].
• If you select Connect using a modem and telephone line, proceed to step 5.
• If your computer is not eqipped with a dial-up adapter, this selection window is not displayed.
Proceed to step 4.
4
Click either the Do not print using a proxy server or the Print using a proxy
server check button. Click [Next >].
• If you select Print using proxy server, enter the IP Address and port number of the proxy
server.
5
Enter the URL of the printer according to the following form:
http://IP Address/ipp or http://host name/ipp.
6
Click [Next >].
Maintenance and Spec. Network
Network
Setup in Windows
45