Contents Of The Printer Software - Panasonic WORKIO DP-CL21 Network Manual

Settings and Printing

Contents of the Printer Software

The following software is included in the printer CD-ROM disk. You can selectively install it using the
installer on the CD-ROM.
■ Printer Driver and Manual
When installing the printer driver and manual, you can selectively install the following software. See
"Windows" section of "Settings and Printing" in the Operating Instructions how to use each software.
(1) PCL 5c printer driver
(2) PostScript printer driver (DP-CL21M only)
(3) Status Display
Displays the printer's condition or an error message, when one occurs.
(4) HDD Utility
Controls the spooled print jobs in the Hard Disk Drive (HDD) or maintain the HDD from your
computer.
(5) Print Media Test Pattern
Examines the print quality by printing out the test pattern.
(6) Operating Instructions
(7) Network Port
Installs the network printer port for LPR, IPP or E-mail port printing.
■ Network Setup Tool
Used to install or make changes to printers on the network.
■ Acrobat Reader
To open and read the Operating Instructions manual on your screen, the Acrobat Reader program is
required (see the Setup Guide for the installing instructions).
■ Remote Maintenance Setting Tool
Enables to use the Remote Maintenance Function. DP-CL21 provides Remote Maintenance Function
to change the setting or get the information of the printer in/outside LAN (Local Area Network) through
the Internet (E-mail). See
Printing".
Maintenance and Spec.
"Remote Maintenance Setting Tool" on page 231
Network
Network
Setup in Windows
in "Settings and
7