Panasonic WORKIO DP-CL21 Network Manual page 90

Settings and Printing
11
Click [Next >].
The InstallShield Wizard Complete window is displayed.
NOTE:
• If you want to change the Destination Folder to install, click [Browse...] button. Then follow the
instructions on the screen to change the destination folder.
12
Click [Finish].
[B] Setting a computer using the shared folder
If the shared folder has been created on the other computer on the network, you can use it to setup
your computer.
1
Open the shared folder of the other computer on the network.
2
Double click Setup.exe in the shared folder.
The License Agreement window is displayed.
3
Click [Yes].
The Choose Destination Location window is displayed.
• You may change the Destination Folder by clicking the [Browse...] button.
4
Click [Next >].
InstallShield Wizard Complete window is displayed.
NOTE:
• For Windows NT4.0:
If the Microsoft TCP/IP Printing service is not installed into the computer, the installer program
terminated, displaying the message "Your computer cannot print out using the LPR port.
You need to install Microsoft TCP/IP Printing Service using the Windows CD-ROM.". See
"Step 3: Installing the LPR port on the computer" on page
5
Click [Finish].
Maintenance and Spec. Network
Network
Setup in Windows
73.
90