Panasonic WORKIO DP-CL21 Network Manual page 120

Settings and Printing
10
Click on the RPRINTER Mode check button.
11
Click [Setup].
12
If you change the setting, click [OK], then click [Yes].
The printer is restarted.
The following are the steps to set up the server.
13
Select the printer you want to configure from the list. Click the Setup menu and
select Create NetWare Queue.
14
Follow the instructions on the screen.
• When asked to select NDS or Bindery mode, select NDS Mode and click [Next >].
Maintenance and Spec. Network
Network
Setup in NetWare
120