Setup In Macintosh - Panasonic WORKIO DP-CL21 Network Manual

Settings and Printing

Setup in Macintosh

DP-CL21M Setup Utility uses TCP/IP. You need to set up AppleTalk and TCP/IP on your computer and
printer. The printer does not work with AppleTalk Phase1.
The following are the steps to set up in a Macintosh environment using the AppleTalk protocol.
Step 1: Setting up AppleTalk and TCP/IP on your computer
Step 2: Setting up TCP/IP on the printer
NOTE:
• DP-CL21P is not available in a Macintosh environment.
■ Step 1: Setting up AppleTalk and TCP/IP on your computer
[For Mac OS 8.1 - Mac OS9.2]
See page 106 for Mac OS X 10.1 - Mac OS X 10.2.
1
Select Control Panels from the Apple menu, then double click AppleTalk icon.
2
Select Ethernet from the Connect via box.
3
Close the dialog.
4
Double click the TCP/IP icon in the Control Panels.
5
Assign the IP Address to your computer or use the DHCP server for TCP/IP
setting.
• To setup the TCP/IP, check with your network administrator.
6
Close the dialog.
Maintenance and Spec. Network
Network
Setup in Macintosh
105