Settings and Printing
[C] Using NDPS - Novell Gateway (NetWare 5.x / NetWare 6 only)
NDPS Manager and NDPS Broker must be created before proceeding the following steps. To use this
method, the TCP/IP communication must be enabled between the server and the printer.
For LPR on IP, see below. For RPRINTER on IPX, see
[For LPR on IP]
1
Start the server system.
2
Start the client system and log on the network in the NDS mode.
3
Double click nwadmn32.EXE to display the NetWare Administrator window.
4
With the container object highlighted, click Create... from the Object menu.
The New Object window is displayed.
5
Select NDPS Printer from the Class of new object box, then click [OK].
The Create NDPS Printer window is displayed.
6
Enter a printer name (for example: DP-CL21M) in the NDPS Printer Name box,
click on the Create a New Printer Agent check box and click [Create].
The Create Printer Agent window is displayed.
7
Click on [...] to the right of the NDPS Manager Name box; highlight the NDPS
Manager object in the left window, and then click [OK].
8
Make sure that Novell Printer Gateway is selected within the Gateway Types
window, and then click [OK].
The Configure Novell PDS for Printer Agent window is displayed.
9
Select [NONE] from the Printer Type box, Novell Port Handler from the Port
Handler Type box, and then click [OK].
The Configure Port Handler for Printer Agent window is displayed.
10
Click on Remote [LPR on IP] check button from the Connection Type, and
then click [Next>].
The Configure Port Handler for Printer Agent window is displayed.
Maintenance and Spec.
Network
Network
page
126.
124
Setup in NetWare