Panasonic WORKIO DP-CL21 Network Manual page 16

Settings and Printing
■ Step 3: Setting up the printer driver and the printer port on the
computer
If the printer driver is already installed on your computer,
installed" on page
[A] If the printer driver is not installed
First install the printer driver and set up the printer port as follows:
1
Insert the printer CD-ROM disk into the CD-ROM drive.
The CD-ROM launches automatically.
NOTE:
• If the CD-ROM does not launch automatically, perform the following steps.
(1) Double click My computer icon.
(2) Double click the CD-ROM icon.
2
Click Custom Printer Setup.
Maintenance and Spec.
25.
Network
Network
see "[C] If the printer driver is already
16
Setup in Windows