Panasonic WORKIO DP-CL21 Network Manual page 117

Settings and Printing
[B] Using NDS - RPRINTER (NPRINTER) mode
The following are the steps to set up the printer. First install the Network Setup Tool by using the printer
CD-ROM disk and then set up the printer.
1
Start the server system.
2
Start the client system and log on the network in the NDS mode.
• If the Network Setup Tool is already installed, click [Start], move the pointer to Programs,
Panasonic and Panasonic DP-CL21P or Panasonic DP-CL21M, then click Network Setup
Tool. Proceed to step 7.
3
Insert the printer CD-ROM disk into the CD-ROM drive.
The CD-ROM launches automatically.
NOTE:
• If the CD-ROM does not launch automatically, perform the following steps.
(1) Double click My computer icon.
(2) Double click the CD-ROM icon.
4
Click Custom Printer Setup.
5
Click Setup Printer in Network (Administrator).
6
Follow the instructions until the screen below is displayed.
Maintenance and Spec. Network
Network
Setup in NetWare
117