Husqvarna P 524X Operator's Manual page 6

(B) is used to move rearward. The product brakes when
the pedals are released.
Switch for electric lift of the cutting deck
The switch controls the electric lift. Use the electric lift to
lift and lower the cutting deck into correct position.
The switch has no set position. Pull the switch for the
electric lift rearward to lift the cutting deck. Push the
switch for the electric lift forward to lower the cutting
deck. The cutting deck can always be lifted and lowered
when the ignition key is in ON position.
Display
The display on the instrument panel shows information
of the status of the product.
1
6
15
1. Slope indicator
6
A
B
2 3
7
10
12
11
The cutting deck must always be in float position when
you cut grass. The float position let the cutting deck to
follow the different levels of the ground.
Cutting deck
The cutting decks for this product are the Combi cutting
decks and the R137 cutting deck. Refer to
data on page 54 .
The Combi cutting decks operate with mulch or rear
discharge. The R137 cutting deck operate with rear
discharge. Mulch cuts the grass into smaller pieces
that become a fertilizer for the lawn.. When the mulch
plug is removed, the cutting deck discharges the grass
rearward.
4
8
13
14
16
2. Indicator for hydraulic oil temperature
Technical
5
9
12
17
1902 - 003 - 09.02.2023