Advertisement
Operation
Product Description
Product Description
This test fixture is designed to facilitate easy and accurate measurements of chip
type components and similar types not furnished with lead wires. Connection of
sample components to the 16034E is done by simply pressing the loading lever to
left, inserting sample components in the V-mount center section (between fixture
jaws) and releasing lever. Components which may be measured with the 16034E
are the rectangular paralleled chip, cylindrical chip, and other similar in shape and
type to components shown in Table 1-1.
Figure 1-1
10
Chapter 1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Advertisement
