Applications - Kohler KD800 Operation

2.11 Applications

Touch the Applications button in the top bar to open the Applications screen. See Figure 2-38. From this screen, you
can access the screens listed in Figure 2-39. Note that access to some screens requires logging on as an operator.
1
5
6
9
10
Figure 2-38 Applications Screen
Number
1 Reference:
Information on the administrative characteristics of the installation: name of the site, case
reference, software versions, etc.
2 Region settings
Used to set the user language, the date, the time, the mechanical units used, insert a
customer- specific logo
3 HMI settings:
Used to adjust the screen brightness in standby mode, and the calibration of the touch
panel
4 Restart:
Used to reboot the HMI module
5 Display cleaning:
Used to lock the screen for 20 seconds to allow cleaning without adversely affecting
operation
Firmware update:
6
Used for the software update for the HMI module
7 Screenshot:
Used to take a screenshot to capture the installation at a given moment
8 Ladder tools:
Used to view additional equations
9 Save parameters:
Used to save the parameters of the application onto a USB key
10 Upload parameters:
Used to load parameters from a USB key
Figure 2-39 Screens Accessed from the Applications Screen
40 Section 2 Operation
2 3 11 4
1. Reference
2. Region settings
7
3. HMI settings
8
4. Restart
5. Display cleaning
6. Firmware update
7. Screenshot
8. Ladder tools
9. Save parameters
10. Upload parameters
11. Applications button
Operator
X
X
X
X
X
X
X
X
X
X
User
X
X
X
X
X
X
X
TP-7070 8/20