Debug Information Report Shortcut - Precor StairClimbers Experience 800 line Series Service Manual

Steps
1. Make sure the console is set to the Welcome banner.
2. Press and hold the VOL down hardkey while pressing CH up > Pause > Pause >
CH up:
3. Touch the designated display positions and follow prompts to complete the touch-
screen calibration.

Debug Information Report shortcut

Console shortcut to download an event log debug information report.
Steps
1. Make sure the console is set to the Welcome banner.
1
2. Insert a USB
3. Press and hold the VOL up hardkey while pressing CH up > CH down > CH down >
CH up:
4. Wait for the download to finish and then remove the USB drive.
1
Short for Universal Serial Bus, is an industry standard developed in the mid-1990s that
defines the cables, connectors and communications protocols used in a bus for connection,
communication, and power supply between computers and electronic devices.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
flash drive into the Chin USB port.
4 Standard Service Menus
How to Access the Standard Service Menus
Page 27