Speed Sensor Pca Board Replacement; About; Procedure - Precor StairClimbers Experience 800 line Series Service Manual

Speed Sensor PCA board Replacement

About

This procedure provides instruction to replace the Speed Sensor
Note: Speed Sensor Wheel .replacement is not included in this procedure. To
replace the Speed Sensor wheel, see
Wheel Replacement" on page

Procedure

Review entire procedure before starting.
Removal
1. Switch the power OFF and disconnect the power cord (slide the red release tab
reward to unlock).
2. Remove the following covers:
Top cover (see
l
Forward Upper/Lower Access covers (see
l
Covers Replacement" on page
Side Access Covers (see
l
Base cover (see
l
1
Printed circuit assembly, generally referred to as either an upper PCA or lower PCA.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Intermediate Sprocket & Speed Sensor
211.
"Top Cover Replacement" on page
88)
"Side Access Covers Replacement" on page
"Base Cover Replacement" on page
6 Replacement Procedures
Speed Sensor PCA board Replacement
1
PCA board.
81)
"Upper and Lower Forward Access
95)
92)
Page 218