Procedure - Precor StairClimbers Experience 800 line Series Service Manual

The left handlebar CHR/SPD CTRL cable plugs into (splices together) the right handlebar
CHR/STOP "Y" cable and connects to the left handlebar grip HHHR sensor and remote up/-
down speed control button.

Procedure

Review entire procedure before starting.
Removal
1. Switch the power OFF and
2. Remove the console rear Access Panel cover. Retain part(s) and/or fastener(s) for
installation.
1
Disconnect a device power cord plug or cable connector from the power receptacle or out-
let.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
1
unplug the power cord.
6 Replacement Procedures
Handlebar Replacement
Page 132