Table of Contents
Advertisement
Error/Warning Code Number
l
Error/Warning Code Description
l
May include additional pertinent event metric information
l
How to open the Error Log:
1. Access the Information Display (65)
2. Select Error Log
3. Select OK hardkey
Clearing Error Codes:
To remove an error code from the Error Log, scroll to select the error code to be removed
and then press/hold the QUICK START key for a minimum of 6 secs until the ."NO
ERRORS" message shows.
TIP: Error code remove shortcut: Press and hold the PAUSE key for a minimum
of 6 seconds to open the Error Log and view all logged error codes. If there are no
logged error codes, the "Stuck Key" message will show. To remove error codes,
select the error code and press/hold the QUICK START key until the "NO
ERRORS" message shows.
CPA Event Log
CPA Event Log
CPA Event Log
Applies To: Touchscreen (P62, P80, and P82) consoles
About
On touchscreen (P62, P80, and P82) consoles you will use the CPA Event Log and not the
Event Log to view error and warning codes. The CPA Event Log only contains service
related error and warning codes, whereas the Event Log contains all event code types
including additional OEM use only error codes. Maintenance error codes are identified with
a "CPA ERROR" tag and warnings are identified with a "CPA WARNING" tag
IMPORTANT: . Make sure to only use the CPA ERROR or CPA WARNING tagged
event codes for service related issues, refer to the
Guide
for description and troubleshooting information.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
7 Troubleshooting
Error Log & CPA Event Log
Error Code Troubleshooting
Page 249
Advertisement
Table of Contents
