Base Cover Replacement
Base Cover Replacement
This procedure replaces the Base cover.
Removal
Review compete procedure before stating.
1. Remove the Top cover (see
"Upper and Lower Forward Access Covers Replacement" on page
Access covers, (see
2. Remove the four #3 Phillips screws, all mounting screws are located on the inside of
the cover. Two screws are located in the front attaching the cover to the front lower
frame weldment. The other two screws attach the rear of the cover to the left and right
Step covers. Retain part(s) and/or fastener(s) for installation.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Top Cover Replacement" on page
"Side Access Covers Replacement" on page
6 Replacement Procedures
Covers and Panels Replacement
81), Front cover (see
88) and Side
92).
Page 95