Error Log & Cpa Event Log; About - Precor StairClimbers Experience 800 line Series Service Manual

Hide thumbs Also See for StairClimbers Experience 800 line Series:
Table of Contents

Advertisement

Error Log & CPA Event Log

About

The Error Log and
CPA
2
On
LED
(P10, P30, P30i and P31 consoles ) use the "Error Log" to view error codes. On
touchscreen consoles (P62, P80, and P82) use the "CPA Event Log" to view error/warning
codes.
Error Log, see
l
CPA Event Log, see
l
IMPORTANT: On touchscreen consoles (P62, P80, and P82), use the CPA Event
Log and not the Event Log to view the maintenance error/warning codes. The touch-
screen console Event Log includes additional OEM use only error codes.
more....
How Error Codes Are Generated and Stored
3
The
Lower PCA
monitors error code event conditions, when a fault is detected, the error
code is generated and transmitted to the console
viewed in the Error Log or CPA Event Log. The error log shows the error code along with
related machine metrics, such as, the machine mileage, hours, the time when the event
occurred, the date, and other machine specific relevant data.
Error codes are sequentially stored in memory on a "First-In, Last-Out" basis, the newest
error code is stored in the number one memory position pushing any currently stored error
codes down one position. When the memory is full, the next new code is stored pushing the
oldest error code from memory.
Repeating Error Codes
Repeated instances of the same error code will only be logged as a single error code until
one of the following conditions occur:
1. Two different errors events occur and are logged
2. There is an "Odometer" and "Hours" change.
1
Touchscreen console Control Processing Assembly.
2
light-emitting diodes.
3
Lower Printed Circuit Assembly board; also refered to as the Lower PCA or simply as the
lower board. On treadmills, it is the console to base function interface and the motor con-
troller unit (MCU). On self-powered units, it is the lower PCA console to base function inter-
face.
4
Upper Printed Circuit Assembly board located in the console.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
1
Event Log is used to store "log" and view error and warning codes.
"Error Log " on the facing page
" CPA Event Log" on page 249
Error Log & CPA Event Log
4
Upper PCA
where it is stored and
7 Troubleshooting
Page 246

Advertisement

Table of Contents
loading

Table of Contents