Error Log - Precor StairClimbers Experience 800 line Series Service Manual

Errors and Warnings
On certain machines, there is a differentiation between errors and warnings. Issues that are
noncritical to the operation of the machine have been demoted from Error status to Warning
status. Error codes will be formatted with an "ERR" prefix identifier and Warning codes will
be formatted with the "WRN" prefix identifier.
Error Codes
l
Error codes are system generated codes that identify specific machine fault con-
ditions. The maintenance software monitors error code event conditions, when a fault
is detected, the error code is generated and stored in the Error Log or CPA Event Log
along with pertinent machine metrics, such as, the machine mileage, hours, event time
stamp, etc. Error codes are identified with the "ERR' prefix.
Warning Codes
l
Warning codes are system generated codes that identify noncritical machine inform-
ation that in most cases will not require service action. Depending on the Warning, the
information could be used by clubs to better utilize and maintain the equipment etc. or
provide additional machine information to help the service technician resolve an issue.
Warnings will not disable functionality, display to the exerciser, or change the
light status.
To differentiate between errors and warnings, error codes will be identified with the "ERR"
prefix and warning codes will be identified with the "WRN" prefix.
Troubleshooting with Error Codes
Always review the Error Log or CPA Event Log when troubleshooting an issue. The error
logs will contain all current and past error codes from the last log reset. You can then refer to
the Error Code Troubleshooting Guide
tion and troubleshooting information.
Note: Be aware that not all machine failures will trigger an error code event. Use
physical observation and mechanical troubleshooting skills to resolve non error
code issues.

Error Log

Error Log
Error Log
Applies To: LED (P10, P30, P30i and P31) consoles
About
1
Active Status Light: Service and maintenance status light.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
(Error Code Troubleshooting
7 Troubleshooting
Error Log & CPA Event Log
1
ASL
Guide) to for descrip-
Page 247