CAUTION: Do not use acidic cleaners and do not spray directly onto the equipment
surfaces.
2. Rinse surfaces using a clean lint-free cloth dampened with water only.
3. Then completely dry with another clean lint-free cloth.
Power Requirements
The StairClimber requires input power to operate the console, system electronics and res-
istance brake system.
Input: 100 V-240 V, 50-60 Hz, 2.0-0.8 Amps
Power cord: A locking power cord is used to prevent accidental disconnect.
Equipment Spacing Requirement
The minimum side to side spacing between StairClimbers is 20 in (60 m) and the minimum
front to back spacing is 20 in (60 m).
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
2 General Information
Power Requirements
Page 16