Handlebar Replacement - Precor StairClimbers Experience 800 line Series Service Manual

Handlebar Replacement

About
This procedure provides instruction to replace the right and left handlebars
Handlebar Interface Cables
The right handlebar
4
PCA board which then connects to the right handlebar grip
Manual Stop switch. The right handlebar CHR/STOP "Y" cable also combines or splices
together with the left handlebar
The left handlebar CHR/SPD CTRL cable plugs into (splices together) the right handlebar
CHR/STOP "Y" cable and connects to the left handlebar grip HHHR sensor and remote up/-
down speed control button.
1
Contact Heart Rate sensor, same as HHHR (Handheld Heart Rate sensor).
2
Upper PCA board
3
Heart Rate
4
Printed circuit assembly, generally referred to as either an upper PCA or lower PCA.
5
Handheld Handlebar Heart Rate
6
speed
7
control
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
1
CHR /STOP "Y" cable connects to the console
CHR/SPD
HHHR
6 7
CTRL cable.
6 Replacement Procedures
Covers and Panels Replacement
2
UPCA board and
5
sensor and Remote
Page 111
3
HR