Side Access Covers Replacement
Side Access Covers Replacement
This procedure replaces the left and right Side Access covers.
Tools are not required to replace these covers. The covers are secured using tabs that snap
and lock in place.
Removal
The same procedure applies to both the left and right trim landing covers.
1. Remove the Top cover (see
(see
"Upper and Lower Forward Access Covers Replacement" on page
2. Grasp the front edge and pull forward to remove the Side Access covers. There are
seven tabs that attach the cover to the Base, Step, and Chain Rail covers.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
"Top Cover Replacement" on page
6 Replacement Procedures
Covers and Panels Replacement
81) and Front cover
88).
Page 92