Table of Contents
Advertisement
CW-113 Assembly and Maintenance Guide
1
Preparations
The CW-113 parts are inspected before shipment.
Each unit contains several pieces that require
assembly. You will need to obtain adult assistance
during the assembly process.
Unpacking the Equipment
When you open the box, carefully unpack the pieces
and lay them on the floor near the location where you
plan to use them.
CAUTION: Be careful when you use a utility knife
to remove the packaging material. Do not cut the
upholstery or scratch the paint.
If any items are missing, contact the dealer from whom
you purchased the unit. For more information, refer to
Obtaining Service.
Preparations
Required Tools
Tools that you need to obtain before assembling the
unit include:
❏ Wire cutter or utility knife
❏ ¾-inch open end wrench
-inch Allen wrench
❏
3
⁄
32
Installation Requirements
Follow these installation requirements when
assembling the unit:
•
Review the Important Safety Instructions.
Assemble the unit where it will be used.
•
•
Install components in the sequence shown.
•
Insert all fasteners in the same direction. For
aesthetic purposes, insert all the fasteners in
the same direction unless specified (in text or
illustrations) to do otherwise.
Leave room for adjustments. Tighten fasteners
•
to keep the unit stable, but leave room for
adjustments.
page 5
Advertisement
Table of Contents
