Table of Contents
Advertisement
Instrument Settings
Preset Settings Tab (Set. A–Set. C)
— Confi gure as necessary —
The measurement conditions (average measurement count, tolerance, and color space)
can be pre-confi gured in up to three ways using the instrument. Also, if Setting A, B, or C
is saved to the measurement conditions, the measurement conditions can be switched to
show the measurement results.
Notes
Viewing or changing measurement condition details can only be performed
through the PC application.
1
On the <Settings> screen (or the <Measure> screen), select the tab
for the setting to change from the "Preset" settings area.
content will be confi gured here.)
2
Confi gure the average measurement count.
2-1
Select "Avg" under "Avg. Meas.", and click the box for entering the
count.
2-2
Enter the desired number.
The numeric pad will be displayed. Use this pad to enter the information.
(2 to 10)
Memo
Only the numeric pad can be used to input values.
2-3
Click "Enter" on the numeric pad.
3
Select the color space.
Memo
• When set to "None", it is possible to set "Averaging" and "ΔE Tol." in advance.
• When the preset display is set to ON, the tab selected here will be refl ected in
the settings for the instrument.
(Cont.)
(Set. A
1 3 4, 5
2
Setting
Avg
2–10
ΔE*
0.1–99.9
ΔL*
0.1–99.9
Δa*
0.1–99.9
Tol.
Δb*
0.1–99.9
ΔC*
0.1–99.9
ΔH*
0.1–99.9
L*a*b* color space
Col.Sp
L*C*h color space
2, 4
51
Advertisement
Table of Contents
