Measurement Result Display; Importing Measurement Data - Konica Minolta CR-10 Plus Instruction Manual

Measurement Result Display

Importing Measurement Data

All data saved in the instrument is referenced and displayed in a list.
Memo This operation is only possible when the "Save to Instrument" setting is turned
ON in the PC application and there is saved data in the instrument.
Notes Data acquisition may take longer when the number of data entries is large.
Perform this operation when time permits.
1
Click "Read".
Once the data has been transferred to the PC
application, a window with the message "Data
transfer complete." will be displayed.
2
Click [OK] to confi rm.
Imported data will be displayed in the Target
List and the Meas. Result List according to the
date and time of measurement.
1
2
68