Target Measurement (Undo) - Konica Minolta CR-10 Plus Instruction Manual

Target Color Setting (Target Measurement)

Target Measurement (Undo)

The following procedure explains how to measure the target again and re-obtain the
target information.
The obtained target data is then written to the instrument.
1
With the target information displayed, click "Clear Target".
2
The target information will be cleared.
3
Set the sample surface aperture on the sample
to measure again.
4
A [When measuring remotely]
a-1 Click the measuring button on the PC
application.
Beep
The measurement results will be displayed in the target data display area on the
PC application.
B [When measuring using a trigger]
b-1 Check the box for "Use Measure Button on Inst."
b-2 Press the measuring button on the instrument.
Beep
The measurement results will be displayed in the target data display area on the
instrument and on the PC application.
(Cont.)
1
b-1
62
a-1